Capacity: 50-100 t/h
Applied Material: Ballast
Introduction: The whole production line is reasonable, the operation investment is less, the crushing efficiency is high, and the finished product has uniform particle size and can achieve relevant standards in energy conservation and environmental protection.
The mineral resources in Kenya are fluorite, limestone, barite, gold, silver, copper, aluminum, zinc, etc. Aggregate crushing is more common in the Kenyan mining industry and the production requirements for the aggregate production line are as follows:
Materials: gravel, sand, ballast, etc.
Feeding Size: 40cm
Finished Size: 0-4mm
Product Configuration: vibrating feeder + jaw crusher + impact crusher + vibrating screen + other auxiliary equipment
Production Process: The raw materials should be sent to jaw crusher for primary crushing. The crushed material with appropriate particle size will be sent to the impact crusher for secondary and fine crushing. If the particle size is too large, it will be sent back to the jaw crusher. And the finished materials will be conveyed to the finished product area.
If your machine fails, production at the entire plant will be at risk. To avoid such losses, you can get critical replacement parts of the machine whenever you need it.
Our products support global logistics network distribution, ensuring that FTM brand spare parts or consumables are available when you need it.
Our fixed-model machines and consumables are available from stock to ensure customers get the machines they need in time.